314.996.5000

Internet Access

Free internet service is available to patients and visitors with properly configured wireless devices and connectivity. When first connecting, you will be presented with our terms and conditions of use. After accepting them, the internet is available. For your protection and the Hospital's, there is content filtering. Once connected, your computer will communicate with a dedicated network, providing access similar to what you have at home or work.

FAQs

Configuration Instructions

Frequently Asked Questions

Q.  What do I need to use this service?
A.  You need a properly configured wireless device. When first connecting, you will be presented with our terms and conditions of use. After accepting them, the internet is available.

Q.  Are there costs involved?
A.  No. This service is free. We do not charge for this, nor is the cost passed on to your insurance company. You must provide your own wireless device and connectivity.

Q.  What is a wireless network?
A. 
A wireless network works the same way as other computer networks, except there are no cables or wires involved. A device with built-in wireless capability or a special wireless network card is required. When properly configured, your computer will communicate with a dedicated network, providing access similar to what you have at home or work.

Q.  What web sites can I access?
A. 
For your protection — and ours — we filter some content. Other than that, the internet is open to you. Read more about this in our Acceptable Use Agreement at the beginning of your Internet session.

Q.  What equipment do I need?

  • Wireless device -- You need your own laptop computer or PDA (personal digital assistant); most personal computers (PCs), pocket PCs and Macintosh computers should work so long as they are properly configured and have an appropriate wireless network card
  • Wireless card -- You need your own wireless network card; on some new devices the wireless card is built in; if not, it will probably need to be inserted into a memory card slot on the side of the laptop or top of the PDA
  • Supported wireless formats -- Your network card must support either 802.11b or 802.11g; though there are other industry standards, they are not implemented
  • Browser -- Your device must use a standard internet browser: Internet Explorer, America Online, Netscape or Safari

Q.  I don't have a wireless card … what now?
A.  Wireless cards are very standardized and may be purchased online or from virtually any retail electronics store. We cannot help you install the card. We do provide basic configuration instructions.

Q.  How secure is my internet session?
A. 
Wireless networks are "shared" among all users and are public. All public networks lack the high level of security you may have at work or home. We encourage you to be careful when sending personally identifiable or sensitive information. If the web sites you visit support the industry standard SSL (secure sockets layer) encryption, our network connection to that site is as secure as if you were on a standard wired network.

Q.  Can I connect to my company's network from here?
A. 
If your company has a VPN (virtual private network) and you can access it from home, you can probably connect to it from here. There are cases where authentication is not permitted. If there's a problem, contact your company's IS Department to see if changes to the VPN settings are necessary.

Q.  Why does my wireless device work at my home or office, but not here?
A. 
This is most likely a configuration issue. There are multiple ways to configure a wireless connection, and we may do it differently than the way yours is set up. If you follow the basic configuration instructions, you can probably get your device to work here.

Q.  I'd like to print an e-mail or article … can I?
A. 
Unfortunately, it is not possible to print from our public wireless network. We just do not have the printer capacity. The best solution is to e-mail the URL of the page to yourself and print it when you return home.

Q.  My network connection works — the lights flash — but I can't connect with the internet
A. 
You are probably set up to use a proxy server. In Internet Explorer, select Tools, then Internet Options, then Connections, then LAN Settings. Make sure the "Use a proxy server" option is unchecked. If you change it, remember to recheck it when you leave.

Q.  It does not work. Who can I call for help?
A.  Unfortunately, privacy and liability concerns prevent us from working on your computer. We recommend you contacting your company's information services help desk, the computer or internet card manufacturer for assistance. We can offer some assistance in getting your computer configured properly. Call 314.362.4711 for help.

Configuration Instructions

If your wireless network card is installed properly and functioning, these instructions should work. Due to the large number of wireless network cards on the market, we are unable to help with this. Refer to your PC manual for assistance.

These configuration instructions work for most laptop computers and PDAs. We cannot guarantee they will work for every device. Due to the variety of wireless hardware -- and for purposes of privacy, security and liability -- we are unable to provide individualized support.

Windows XP Configuration

  • Select Start, then Control Panel, then Network and Internet Connections, then Network Connections
  • Right-select the Wireless Connection icon and select Properties
  • Select the Wireless Networks tab
    • The "Use Windows to Configure My Wireless Network Settings" option should be checked
    • Select the "Add" button under the Preferred Networks box
    • Set and confirm, then select OK
      • Network Name (SSID) = bjcpai
      • Network Authentication = open
      • Data Encryption = disabled
      • Authentication tab = all disabled
  • Select the General tab
    • Select Internet Protocol (TCP/IP), select the Properties button
    • On the General tab, verify that "Obtain an IP Address Automatically" and "Obtain DNS Server Address automatically" are selected
    • Select OK

Windows 2000 Configuration

  • Select Start, then Settings, then Network and Dial-Up Connections
  • Right-select the Wireless connection icon and select Properties
  • On the General tab, select the Configure button
  • Select the Advanced tab
  • Set and confirm, then select OK:
    • SSID = bjcpai
    • Infrastructure Mode = Yes
  • Select Internet Protocol (TCP/IP), select the Properties button:
    • On the General tab, verify that "Obtain an IP Address Automatically" and "Obtain DNS Server Address Automatically" are selected
    • Select OK
  • After making changes, you may need to remove and reinsert your laptop's wireless card

Windows Vista Configuration

  • Select the new Start button and select "Connect to"
  • In the next dialog box that follows select "Setup a connection or network" shortcut
  • Select "Manually connect to a wireless network" and select "Next"
  • Select the wireless adapter if prompted
  • Enter the following information into the fields:
    • Network Name (SSID) = bjcpai
    • Security Type = No Authentication (Open)
    • Encryption Type = None
    • Security key/Passphrase (leave this blank)
    • Check the box "Start this connection automatically"
    • Check the box "Connect even if the network is not broadcasting" and select "Next"
  • Once added, select "Connect to" and select "bjcpai" and select "Connect"

Mac OS X Configuration

  • Select Apple, then System Preferences
  • Select the Network icon
  • Next to Location, select the down-arrow and select New Location
  • Name the New Location "BJC" and select OK
  • Next to Show, select the down-arrow and select Network Port Configurations; leave the checkmark in front of AirPort, and remove all other checkmarks such as Internal Modem or Ethernet
  • Next to Show, select the down-arrow and select AirPort; set and confirm:
    • Select the TCP/IP tab
    • Ensure that DHCP is enabled
    • Choose, join a specific network
    • Network = bjcpai
    • Password (leave blank)
    • Deselect the "Allow this computer to create networks" option
  • Select Apply Now
  • Close the System Preferences window
Copyright © 1997-2014 BJC HealthCare. All Rights Reserved.